Apply a starter fertiliser to your soil
Once you have a reasonable amount of underlay levelled (we recommend 100mm), apply a starter fertiliser such as Lawn Launcher, this will encourage deeper root growth and really support your lawn in the establishment phase. See How To Lay Turf Part 2 for more about preparing the ground before lawn installation.
Start laying turf around the perimeter
If you are laying your turf on a slope, start at the bottom. Place your rolls or slabs of turf around the perimeter of the area and lay between the perimeter. Stagger the joints in a brickwork fashion to avoid erosion and butt the turf closely together to avoid gaps – this is where your turf can dry out and cause a patchy lawn.
Don’t throw turf offcuts away
When cutting is required use a sharp knife of shears, but don’t throw these off cuts away. When you have finished laying you will probably find there are a few unusual spaces to fill and these bits are perfect for that.
Water your new lawn as soon as possible
Water as soon as possible. If you are laying a large lawn, try and water as you go – especially on a hot day. If you have access to a roller, we recommend rolling the lawn to ensure good root contact with the soil.
For more information on installing your new lawn, check out our other videos and guides on how to lay turf or contact your local Lawn Solutions Australia member.
